Bissell PowerWash Deluxe 1694 series - Manual (Page 7)

7
To Fill The Tank-in-Tank
NOTE: Make sure to add formula to the tank before
filling it with water.
Depress the Handle Release pedal to lay the
machine handle down, out of the way.
Lift the Tank-in-Tank handle. The handle locks the
lid in place. Carry the Tank-in-Tank like a bucket
to fill at the sink.
Set the tank down and rotate the handle forward
to unlatch the lid. Lift off and set the lid aside.
Find the mouth of the bladder and fill to the
bottom of the neck with hot tap water.
Do not
boil or microwave water.
NOTE: Fill the bladder with water only. Fill slowly to
reduce sudsing.
Replace the tank lid, matching the lid and tank
edges. Rotate the handle to carrying position.
Replace tank in machine base, seating firmly
in place. Rotate handle back down to
latched position.
This easy-to-use system is designed with a bladder inside to
hold clean water. As you clean, the bladder will empty. Dirty
water collects in the tank outside the bladder.
1.
2.
3.
4.
5.
Your PowerWash Deluxe is equipped with a Measuring
Cup for adding the proper amount of cleaning formula
to the Tank-in-Tank
™ . Before using the machine,
simply fill the Measuring Cup to the fill line with
BISSELL Fibre Cleansing Formula. Pour the formula
into the Tank-in-Tank as shown. For convenience, the
Measuring Cup stores on the back of the unit.
Measuring Cup
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from
outlet before servicing.
Tilt Handle
Back
Handle
Release
Lift and
Carry
Rotate Handle to
Unlatch
Fill Bladder
only with clean
tap water
1
2
4
3
5