Rockwell Automation 1734-IM2_IM4 POINT I/O 220V AC Input Module - Manual (Page 21)

POINT I/O 220V ac Input Module 21
Publication 1734-IN008C-EN-E - January 2007
Specifications
220V ac Input Modules - 1734-IM2 and 1734-IM4
Attribute Value
Number of Inputs 1734-IM2: 2 (1 group of 2) nonisolated, sink
1734-IM4: 2 (1 group of 4) nonisolated, sink
On-state Voltage Range,
Min 159V ac
On-state Voltage Range,
Nom 220V ac
On-state Voltage Range,
Max 264V ac
On-state Current, Min 6.2 mA @ 159V ac, 60 Hz
On-state Current, Nom 8.5 mA @ 220V ac, 60 Hz
On-state Current, Max 10.2 mA @ 264V ac, 60 Hz
Off-state Voltage, Max 43V ac
Off-state Current, Max 2.9 mA
Input Impedance, Nom 22.3 k
Ω
Delay Time
(1)
Off to On and On to Off
(1)
Input off-to-on filter time is the time from a valid input signal to recognition by the module. Input
on-to-off filter time is the time from the input signal dropping below the valid level to recognition by
the module. Due to the randomness of the ac line cycle measurement capture point and response time
of the hardware filter, the maximum hardware delay is 20 ms plus the filter time.
20 ms hardware filter plus 1…64 ms digital filter
programmable in increments of 1 ms
Keyswitch Position 8