Rockwell Automation 1734-ADN POINT I/O DeviceNet Adapter Quick Start - Manual

1 Publication 1734-QS002A-EN-P - September 2000
Quick Start
POINT I/O DeviceNet Adapter
(Cat. No. 1734-ADN)
Read This First
Read this document before using your POINT I/O DeviceNet
Adapter (1734-ADN).
Updated Configuration Software
You need the following software versions to operate your 1734-ADN
as designed:
•
RSLinx, Version 2.20, Service Pack 1
•
RSNetWorx for DeviceNet, Version 2.24.11
You can install the software service packs from one of the
following lcoations:
•
POINT I/O Configuration Software CD - The CD shipped with
your 1734-ADN and contains documentation for installation.
The POINT I/O Configuration Software CD should have
arrived with your 1734-ADN. If you did not receive the CD,
contact your local Rockwell Automation representative.
IMPORTANT
If you do not have the versions listed above, you
need to install the service pack.