Rockwell Automation 1732D-XXXX DeviceNet ArmorBlock 16-Point I/O, Series A - Manual (Page 8)

8 DeviceNet 1732 ArmorBlock 16-Point I/O, Series A
Publication 1732D-IN002B-EN-E - January 2013
Mount in High Vibration Areas
Connect the I/O Cord Sets to the ArmorBlock Module
The ArmorBlock DeviceNet family has 5-pin micro-style connectors.
We provide caps to cover the unused connectors on your module. Connect the
quick-disconnect cord sets you selected for your module to the appropriate ports
Network Connector
Refer to the pinout diagram for the network connector.
ATTENTION: If any I/O devices connected to this equipment requires Class 2
power to operate, this equipment and all connected I/O must be must be
powered by a Class 2 source.
ATTENTION: To comply with the CE Low Voltage Directive (LVD), this
equipment and all connected I/O must be powered from a source compliant
with the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
44766
Lock Washer
Flat washer