Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switches Installation Instructions - Manual (Page 17)

Stratix 6000 Ethernet Managed Switches 17
Rockwell Automation Publication 1783-IN004B-EN-P - June 2014
c. From the Ethernet Protocol (TCP/IP) Properties menu, change the
IP address to 192.168.1.3 and Subnet mask to 255.255.255.0.
2. Connect to the switch via a Web browser by using these steps.
a. Open a browser window.
b. Enter the default IP address of 192.168.1.1 in the address bar, press
Enter, and note the following defaults:
• User name should be left blank.
• Password is PASSWORD.
3. Configure the switch.
You can get complete configuration instructions by clicking the link to
view the embedded manual.
4. If the switch is to scan in a Logix 5000™ program, refer to the appropriate
section of your embedded manual.