Rockwell Automation 1763-L16xxx MicroLogix 1100 Embedded Web Server User Manual - Manual (Page 12)

6 Rockwell Automation Publication 1763-UM002D-EN-P - May 2014
Chapter 2 Use Data Views to Access Controller Data
Change an Access Group Each data view contains a group of files that you want to monitor. Each
MicroLogix 1100 controller can support multiple data views. One browser
supports one data view, so if you want to look at many data views, you need to run
a corresponding number of browsers.
You change an access group from the Data Views
→ New Data View page.
1. From the Access Group pull-down menu for the given data table file,
choose the access group type you wish to assign. Choose from:
• Administrator (all access)
• Write (read/write access only)
• Read (read access only)
2. Choose Administrator, Write, or Read from the Access Group pull-down
menu to change a file's access group.
3. Click Apply
to change an access group for the data table file you
specified.