Rockwell Automation 1738-AENT ArmorPoint EtherNet/IP Adapter, Series A - Manual

1 Publication 1738-IN017B-EN-E - March 2005
Installation Instructions
ArmorPoint EtherNet/IP Adapter, Series A
Catalog Number 1738-AENT
The ArmorPoint EtherNet/IP adapter ships with the adapter and a
terminating base to be used with the last I/O module on the
backplane. The sealed IP67 housing of the adapter requires no
enclosure. (Note that environmental requirements other than IP67
may require an additional appropriate housing.) The EtherNet/IP
connector is a sealed D-coded M12 (micro) style. The ArmorPoint
EtherNet/IP adapter is shown below.
1738-AENT
EtherNet I/P
Adapter
Status
Network
Activity
Network
Status
PointBus
Status
System
Power
Adapter
Power
X100
X10
X1
conformance tested ™
PWR
P
A
D
D
R
E
S
S
I
43798
M12
Connector
Auxiliary
Power
Connector
Network
Address
Switches