Rockwell Automation 1786-RPCD ControlNet Modular Repeater Dual Copper Module User Manual
Page 8
Advertising
8 ControlNet Dual Copper Repeater Module
Publication 1786-IN001B-EN-P - May 2004
The figure below identifies the components of the module:
Indicators
Channel 1
coax port
Channel 2
coax port
Module
locking tab
Right-side backplane
connector with
protective cover
42210
The left side of the
module (not shown
here) also contains a
backplane connector.
75
Ω
BNC Trunk line terminators
(1786-XT)
Important:You must terminate
unused channels to maintain the
integrity of your network.
Advertising