Rockwell Automation Logix5000 Controllers Add-on Instructions Programming Manual - Manual (Page 89)

Using Add-On Instructions Chapter 3
4. Go to the other project where you want to paste the instruction.
5. Right-click the Add-On Instructions folder and select Paste.
There are two ways to store a group of Add-On Instructions together. One is to
save your Add-On Instructions in a project file. Another is to create an L5X
export file, as described in Chapter 4 on page 91 .
Follow these steps to store your instructions by saving them in a project file.
1. Identify what instructions you want to store.
2. Place them in a project file called something like ‘MyInstructions.ACD’.
3. Open other projects in additional instances of Logix Designer application
and use copy and paste or drag and drop to move a copy of the instruction
from ‘MyInstructions.ACD’ to another project.
If any of these instructions reference the same Add-On Instruction or
User-Defined Data Type, there is only one shared copy in the project file. When
an Add-On Instruction is copied to another project, it also copies any instruction
it references to the target project.
Storing your Add-On
Instructions
Rock well Automati on Publication 1756- PM010F-EN-P - Oct ober 2014 89