Rockwell Automation 1732D-IB161212D DNet ArmorBlock Network Powered 16-input Module, Series A, IN - Manual (Page 5)

DeviceNet ArmorBlock Network Powered 16-input Module, Series A 5
Publication 1732D-IN012A-EN-E - May 2009
Catalog Number Explanation
The catalog number 1732D-IB161212D identifies a DeviceNet 24V DC
8-port 16-input M12-style network connector module.
Install the Module
To install the module:
•
Set the node address
•
Mount the module
• Connect the cord sets
Set the Node Address
Valid node addresses are 00 through 63.
Set the node address using either the rotary switches, RSNetWorx for
DeviceNet, DeviceNetManager, or another software configuration tool.
Setting the switches at any number from 64 through 99 lets the software have
address control.
Each module is shipped set for node address 63. Remove the caps on the
front of the module to access the switches. The two switches are:
•
X10 (most significant digit) - left side of module
•
X1 (least significant digit) - right side of module