Rockwell Automation 1734-ACNR Point I/O ControlNet Adapter Installation Instructions - Manual (Page 19)

19
Publication 1734-IN582B-EN-P - February 2005
Power Supply Specifications
Input Voltage Rating 24V dc nominal 10-28.8V dc range
Field Side Power Requirements 24V dc (+20% = 28.8V dc maximum) @ 425mA maximum
Inrush Current 6A maximum for 10ms
Interruption Output voltage will stay within specifications when input
drops out for 10ms at 10V with maximum load.
General Specifications
Indicators 4 red/green status indicators
Adapter status
PointBus status
ControlNet A status
ControlNet B status
2 green power supply status indicators:
System Power (PointBus 5V power
Field Power (24V from field supply)
Power Consumption 10.2W maximum @ 28.8V dc
Power Dissipation 5.0W maximum @ 28.8V
PointBus Output Current 1A maximum @ 5V dc ±5% (4.75 - 5.25)
Input Overvoltage Protection Reverse polarity protected
Thermal Dissipation 16.9 BTU/hr maximum @ 28.8V dc
Isolation Voltage Tested to withstand 750Vac for 60s
Field Power Bus
Nominal Voltage
Supply Voltage Range
Supply Current 24V dc
10-28.8V dc range,
10A maximum
Dimensions Inches
(Millimeters)
3.0H x 2.16W x 5.25L
(76.2H x 54.9W x 133.4L)