Rockwell Automation 1771-SPI,D17716.5.122 SPI PROTOCOL INTERFACE - Manual (Page 42)

Creating Command and Status Blocks
Chapter 4
4-6
Blank CCB Worksheet for Your Application
Copy this worksheet as needed.
Write your own entries in this blank worksheet to suit your application.
CCB Worksheet
Word Write your entries in this column.
1 device ID: name ___________________________________ code ____________
2 # numeric preset words = _____ # bitĆcommand words = ______
3 # bit status words = _______ # ASCII strings = ______
4 # ASCII status words = _______ # numeric status words = ______
Word Write your entries in this column. [1] CMD1 CMD2
5 bit command 1
numeric preset 1
ASCII strings 1
Word Write your entries in this column. [1] [2] CMD2 CMD1
bit status word 1
numeric status word 1
ASCII status word 1
[1] Leave no blank words between groups of entries. If not using a group, put the next group in its space.
[2] Status words that you specify here are returned in CDS whenever the SPI module polls its devices.