Rockwell Automation 1760 Pico GFX-70 Controllers Quick Start - Manual (Page 5)

1 Publication 1760-QS002A-EN-P - April 2004
Chapter
1
Overview of Course 1
Course 1 Objective Course 1 is designed to help you get to know the PicoSoft Pro user
interface. The procedures will acquaint you with the three sections of
the user interface and the four different views that you will use. Take
advantage of this course to see how simple it can be to work with
PicoSoft Pro.
Course 1 consists of:
Course 2 provides more advanced information on using the features
found in PicoSoft Pro.
Chapter Title Procedures
2 Lesson 1 Creating a Pico Project
Creating a Circuit Diagram
Circuit Diagram Simulation
Establishing a Connection with the Device
Documenting the Project
3 Lesson 2 Wiring a Pico Controller Timing Relay
Timing Relay Simulation
Setting System Properties
Using Notes
4 Lesson 3 Adding Rungs and Drawing Connections
Input Simulation
Uploading a Program
Using the Cross-Reference List