Rockwell Automation 1794-ACNR INSTL INSTR REDUNDANT MEDIA - Manual (Page 6)

FLEX I/O ControlNet Redundant Media Adapter 6
Publication 1794-5.18 – September 1996
Power Supply Note: In order to comply with CE Low Voltage
Directives, you must use a Safety Extra Low
Voltage (SELV) or a Protected Extra Low
Voltage (PELV) power supply to power this
adapter.
Input Voltage Rating 24V dc nominal
Input Voltage Range 19.2V to 31.2V dc (includes 5% ac ripple)
Communication Rate 5M Bits/s
Indicators Comm A – red/grn
Comm B – red/grn
I/O Status – red/grn
Flexbus Output Current 640mA maximum @ 5V dc
Isolation Voltage 100% tested at 850V dc for 1s between user
power and flexbus
Power Consumption 400mA maximum from external 24V supply
Power Dissipation 4.6W maximum @ 19.2V dc
Thermal Dissipation 15.7 BTU/hr @ 19.2V dc
Environmental Conditions
Operational Temperature
Storage Temperature
Relative Humidity
Shock
Operating
Non-operating
Vibration
0 to 55 o C (32 to 131 o F)
–40 to 85 o C (–40 to 185 o F)
5 to 95% noncondensing
30 g peak acceleration, 11(+1)ms pulse width
50 g peak acceleration, 11(+1)ms pulse width
Tested 5 g @ 10–500Hz per IEC 68-2-6
ControlNet Cable Belden RG-6/U
Power Conductors
Wire Size
Category
12 gauge (4mm 2 ) stranded maximum
3/64 inch (1.2mm) insulation max.
2
1
Specifications continued on next page