Rockwell Automation 1738-CBL3M25DS ArmorPoint 25-pin D-sub Connector Interface Cable - Manual

Installation Instructions
ArmorPoint 25-pin D-sub Connector
Interface Cable
Catalog Number 1738-CBL3M25DS
Application
Use the 1738-CBLM25DS 25-pin D-sub connector interface cable to connect
the 1738-OB16E25DS module, or another I/O module that has a similar
D-sub connector, to a pneumatic valve interface.
The cable is 3 m (9.84 ft) long.
Cable Diagram
The cable has a 25-pin D-sub male connector compatible with the 25-pin
D-sub female connector on the 1738-OB16E25DS module.
The other end of the cable consists of loose wires for connecting to the
pneumatic valve interface.
44972
25-pin D-sub connector
3 m (9.84 ft)