Rockwell Automation 1734-OB2_OB4_OB8, Series C POINT I/O Output Module Installation Instructions - Manual (Page 6)

6 POINT I/O Output Module
Publication 1734-IN018C-EN-E - April 2013
Before You Begin
You can use these Series C POINT I/O™ Output modules with DeviceNet and
PROFIBUS adapters. If you are using RSLogix 5000 software, version 11 or higher, you
can also use the Series C modules with ControlNet and Ethernet adapters.
Use this diagram to identify the external features of the module. The 1734-VHSC5
module is shown here.
POINT I/O Output Module
Description Description
1 Module locking mechanism 6 Mounting base
2 Slide-in writable label 7 Interlocking side pieces
3 Insertable I/O module 8 Mechanical keying (orange)
4 Removable Terminal Block handle 9 DIN rail locking screw (orange)
5 Removable Terminal Block 10 Module wiring diagram
24VDC Source Output
Modu
le
Sta tus
Network Status
1734 OB4E
NO DE:
0
1
2
3
1
10
9
8
7
2
4
5
6
3
The wiring base assembly consists of a
mounting base, 1734-MB, and Removable
Terminal Block, 1734-RTB or 1734-RTBS.
44330