Rockwell Automation 1788-CN2FFR Redundant ControlNet to FOUNDATION Fieldbus Linking Device - Manual (Page 6)

6 Redundant ControlNet to FOUNDATION Fieldbus Linking Device
Publication 1788-QS007A-EN-P - October 2012
6. Open the 1788-CN2FFR linking device’s Module Properties dialog box and click the
Configuration Tab.
7. Configure the linking device by setting the required Topology mode, Max Scan Address,
and MacroCycle time.
8. Download the configuration to your controller.
9. Go online with the controller to see all attached field devices, which will appear in the
Configuration tree on the left side below the Master.
Field devices can now be configured.
Operation
The following features can be used to view the data and status of the field devices connected to
the 1788-CN2FFR linking device.