Rockwell Automation 1788-CN2PAR Redundant ControlNet to PROFIBUS PA Linking Device Quick Start - Manual (Page 5)

Redundant ControlNet to PROFIBUS PA Linking Device 5
Add a 1788-CN2PAR Module in RSLogix 5000 Software
The module must be added to the RSLogix 5000 IO tree by selecting the 1788-CN2PAR
module (under an Allen-Bradley Ethernet bridge, such as CN2T).
1. Right-click the Ethernet bridge and choose New Module.
2. Expand the Hiprom Technologies option and select 1788-CN2PAR.
The Module Properties dialog box appears.
3. Type the module’s Name, Description, IP Address, and RPI.
4. Click OK.
5. Open RSNetWorx software for ControlNet and add the module to the schedule.