Rockwell Automation 1771-IN ac (24V) Input Module Installation Instructions - Manual

1 Publication 1771-IN082A-EN-P - February 2005
Installation Instructions
AC (24V) Input Module
Cat. No. 1771-IN
Contents Use this document as a guide when installing the catalog number 1771-IN ac
input module.
Important User Information
To: See Page:
Important User Information 1
Preinstallation Considerations 3
Calculate Power Requirements 4
Key the Backplane Connector 4
Install the Field Wiring Arm 4
Connect Wiring to the Field Wiring Arm 5
Interpret the Status Indicators 7
Specifications 8
Rockwell Automation Support BackCover
Solid state equipment has operational characteristics differing from those
of electromechanical equipment. Safety Guidelines for the Application,
Installation and Maintenance of Solid State Controls (Publication SGI-1.1
available from your local Rockwell Automation sales office or online at
http://www.ab.com/manuals/gi) describes some important differences
between solid state equipment and hard-wired electromechanical devices.
Because of this difference, and also because of the wide variety of uses for
solid state equipment, all persons responsible for applying this equipment
must satisfy themselves that each intended application of this equipment is
acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for
indirect or consequential damages resulting from the use or application of
this equipment.
The examples and diagrams in this manual are included solely for
illustrative purposes. Because of the many variables and requirements
associated with any particular installation, Rockwell Automation, Inc.
cannot assume responsibility or liability for actual use based on the
examples and diagrams.