Digital output terminals – Rockwell Automation 1753-L28BBB-M_P GuardPLC 1600 Controllers User Manual
Page 11
11
Rockwell Automation Publication 1753-IN001C-EN-P - June 2010
Digital Output Terminals
Terminals accommodate wires up to 1.5 mm
2
(16 AWG). See the terminal torque specifications
on page
. Digital outputs are connected to these terminals.
For connection of a load, the reference pole L- of the corresponding channel group must be used
(2-pole connection). Although L- at terminals 1 and 6 and at 7 and 12 is connected internally to
L- on the power supply input, it is strictly recommended to use 1 and 6 for outputs 1…4 only and
7 and 12 for outputs 5… 8 only. EMC testing was performed in this manner.
Terminal Number
Designation
Function
Current
1
L-
Reference pole
—
2
1
Digital output 1
0.5 A
3
2
Digital output 2
0.5 A
4
3
Digital output 3
0.5 A
5
4
Digital output 4 (for increased load)
2.0 A
6
L-
Reference pole
—
7
L-
Reference pole
—
8
5
Digital output 5
0.5 A
9
6
Digital output 6
0.5 A
10
7
Digital output 7
0.5 A
11
8
Digital output 8 (for increased load)
2.0 A
12
L-
Reference pole
—
1 2 3 4 5 6
1 2 3 4
1
L-
L-
DO
2
(2A)
3 4
5 6
7 8 9 10 11 12
7 8 9 10
5
L-
L-
DO
6
(2A)
7 8
11 12