Rockwell Automation DeviceNet SEMINAR LAB EX - Manual (Page 70)

70 DeviceNet Seminar Lab Exercises
Publication 1787.6.1 - August 1997
Notice that the I:1/67 contact is green. Pressing the RediSTATION
operator interface’s Start button or Stop button causes bits I:1/24 or I:1/
25 to go green. This energizes
O:1/16, which is represented by the coil turning green, and turns on the
RediSTATION operator interface’s light.
3. Rotate the selector switch until an amber 2 is illuminated on the 1794-
IB16.
Notice that the I:1/66 contact is green. Putting your hand between the
photoeye and the reflector causes bit I:1/30 to go green. This energizes
O:1/16, which is represented by the coil turning green, and turns on the
RediSTATION operator interface’s light.
4. Minimize the RSLogix 500 programming software.
This completes the organized laboratory exercises for DeviceNet
Manager and RSLogix 500 programming software.