Rockwell Automation 1790D-XXXX DeviceNet Analog Base D-Shell CompactBlock LDX I/O - Manual (Page 7)

7
Publication 1790-IN004B-EN-P - April 2003
5. Replace the block on the panel and place a screw
through each of the two mounting holes. Tighten the
screws until the block is firmly in place.
DIN Rail Mounting
1. Hook the top slot of the block over the DIN Rail.
2. Pull down on the locking lever while pressing the block
against the rail.
3. Push up on the locking lever to secure the block to the
rail when block is flush against the rail.
Mount the Optional Expansion Blocks
Mount the expansion block by connecting it to a
previously-installed CompactBlock LDX I/O base or expansion
block.
CompactBlock LDX
1790-16BVO X
EXPANSION UNIT
16 INPUTS-DCPOWER
0
7 0
7
41 mm
1.6 in
95 mm
3.74 in
Expansion
Cover
Locking Lever
f