Rockwell Automation 1734-IT2I, Series C Point I/O RTD and Isolated Thermocouple Input Module Installation Instructions - Manual (Page 12)

12 POINT I/O™ RTD and Isolated Thermocouple Input Modules
Publication 1734-IN011H-EN-E - February 2014
Wire the Module
To wire the module, refer to the diagrams and tables.
POINT I/O RTD Input Module – 1734-IR2, 1734-IR2E
WARNING: If you connect or disconnect wiring while the field-side power is
on, an electrical arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
RTD
Input
NODE:
0
1
1734
IR2
Module status
Network status
Status of input 0
Status of input 1
Input 0/A high input
Input 0/B low input
RET 0
Shield
Input 1/B low input
Input 1/A high input
46015
RET 1
Shield