Rockwell Automation 1753-CFBBASIC Certified Function Blocks for RSLogix Guard PLUS! - Manual (Page 2)

Publication 1753-IN008C-EN-P - September 2005 PN 40071-180-01(3)
Supersedes Publication 1753-IN008B-EN-P
-
August 2005 Copyright © 2005 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Use the Certified Function Block Library in Your Project
A link to the Certified Function Block library is automatically created for new
RSLogixGuard PLUS! projects. For existing projects, you need to create a link to the
Certified Function Block library before you can use the Certified Function Blocks.
1. Create a new link by right-clicking on the project in the project tree and
selecting New>Link.
2. Name your link ‘RA Certified Function Blocks’.
3. Right-click on the new link and select Properties.
4. In the Target field, click the Find Target button and browse to:
v3.5: your RSLogix Guard PLUS! directory\ENG\RA Certified Function
Blocks.L2L
v4.0: your RSLogix Guard PLUS! directory\LC\ENG\RA Certified Function
Blocks.L2L
v4.1: your RSLogix Guard PLUS! directory\LC\ENG\RA Certified Function
Blocks.L2L
5. Click OK.
You can now drag and drop Certified Function Blocks into your project just as you
would standard function blocks.
RSLogix is a trademark of Rockwell Automation.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
TIP
Your default directory is C:\Program Files\RSLogix
Guard PLUS