Rockwell Automation 1738-232ASCM12 ArmorPoint I/O RS-232 ASCII Module, Series A User Manual
Page 5
Advertising
Publication 1738-IN009A-EN-E - June 2004
ArmorPoint I/O RS-232 ASCII Module, Series A 5
Install the mounting base as follows:
1. Lay out the required points as shown above in the drilling
dimension drawing.
2. Drill the necessary holes for #8 (M4) machine or self-tapping
screws.
3. Mount the base using #8 (M4) screws.
4. Ground the system using the ground lug connection. (The
ground lug connection is also a mounting hole.)
Ground lug connection
Latching mechanism
Keyswitch-
Set to position 2 for
the 1738 specialty
modules
Mounting base
43675
Advertising