Environment and enclosure information, European union directive compliance – Rockwell Automation 6189V-MCLPS2 Mounting Clips User Manual
Page 3
Mounting Clips 3
Publication 6176M-IN002A-EN-P - August 2006
Environment and Enclosure Information
Review the information on enclosures and environments before installing the
product.
European Union Directive Compliance
This product meets the European Union Directive requirements when installed
within the European Union or EEA regions and have the CE mark. A copy of the
Declaration of Conformity is available at the Rockwell Automation/Allen-Bradley
website:.
ATTENTION
Environment and Enclosure
This equipment is intended for use in a Pollution Degree 2
industrial environment, in overvoltage Category II applications (as
defined in IEC publication 60664-1), at altitudes up to 2000 m
(6561 ft) without derating.
This equipment is considered Group 1, Class A industrial
equipment according to IEC/CISPR Publication 11. Without
appropriate precautions, there may be potential difficulties
ensuring electromagnetic compatibility in other environments due
to conducted as well as radiated disturbance.
This equipment is supplied as open type equipment. UL Listed
equipment need not be mounted inside another enclosure if
NEMA Type, UL, or IEC ratings are not required, but the mounting
method must limit the tilt of the product to +/- 30 degrees from
vertical. Examples include articulated arm, table-top stand, wall
mount or other means having sufficient mechanical stability and
which is secured to the mounting surface. Units that are not
rack-mount ship with a gasketed bezel to meet specified NEMA
Type, UL, and IEC ratings only when mounted in an enclosure
with equivalent ratings. Subsequent sections of this publication
may contain additional information regarding specific enclosure
type ratings required to comply with certain product safety
certifications.
See NEMA Standards publication 250 and IEC publication 60529,
as applicable, for explanations of the degrees of protection
provided by different types of enclosure. Also, see the appropriate
sections in this publication, as well as Industrial Automation
Wiring and Grounding Guidelines, Allen-Bradley publication
1770-4.1, for additional installation requirements pertaining to this
equipment.