Rockwell Automation 2100 CENTERLINE MCC Joining Splicing Vertical Sections - Manual (Page 14)

AMP MATERIAL QTY THICKNESS WIDTH SPLICE MTG. HOLES
600
Copper/Tin 1 .125”
3”
2 Copper/Silver 1 .125”
Aluminum/Tin 1 .125” 4”
800
Copper/Tin 1 .125”
4” 2 Copper/Silver 1 .125”
Aluminum/Tin 1 .1875”
1200
Copper/Tin 1 .250”
4” 2
Copper/Silver 1 .250”
1600
Copper/Tin 2 .250”
4” 4
Copper/Silver 2 .250”
2000
Copper/Tin 1 .250”
4” 4
1 .375”
Copper/Silver 1 .250”
4” 4
1 .375”
2500/
3000
Copper/Tin 2 .375”
4” 4
Copper/Silver 2 .375”
14 CENTERLINE ® 2100 Motor Control Centers Joining and Splicing Vertical Sections
Figure 13 Insulated “Z” 600 - 1200 Amp Bus Splicing Detail and Configuration
Example
Main Horizontal Bus or
Neutral Bus (5” Deeper)
Main Horizontal Splice
One-piece assembly of
nut and conical spring
Bus Clamps
washer
Insulated
Splice Kit Configuration Example Front
(Top View - 3 Sections)
Main Horizontal Splice or Neutral
Flat Washers Bus (standard location)
Refer to Table A for bus size and thickness.
Table A Bus and Splice Bar Dimensions
STANDARD NEMA 1, 1G, 12 & 3R SPLICE BAR INFORMATION
Publication
2100-IN010D-EN-P—February 2007