Rockwell Automation 6156 Industrial 14 inch CRT Monitors - Manual (Page 14)

Industrial 14” CRT Monitors 14
Publication 6156-2.0
Connect the Industrial Monitor to a computer with a video cable. A
keyboard extender cable is required for monitors equipped with the
keypad option. A touchscreen serial cable is required for monitors
equipped with the touchscreen option. To connect your monitor to a
computer:
1. Plan the route for the cables through the enclosure and confirm
that the cables you have ordered are long enough for the routing
you have chosen.
Figure 7
Rear Panel of Monitor
R G B CS
(male)
(female) Sync Selector
AC Cable Restraint
Connecting to a Computer