Rockwell Automation 2711-NL5 Display Backlight for PanelView 600 (Series C) - Manual (Page 4)

4 Display Backlight for PanelView 600 (Series C)
Publication 2711-IN040A-MU-P - October 2003
To Remove the Backlight
1. Turn off the power to the PanelView terminal.
2. Lay terminal on front. Remove six bezel screws from the shroud.
3. Turn terminal over and rest on back cover.
4. Open bezel to the right. Use caution with cables; prop up bezel so cables
are not strained.
Bezel
Screws
Bezel
Screws