Brocade Communications Systems ServerIron ADX 12.4.00 User Manual
Page 152
140
ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
Smoothing mechanism for RTT measurements
1
----------------------------------------------------------------
RTT value after smoothing = 27, RTT decimal val = 0.100
ignore-larger-rtt-count = 1
ignore-smaller-rtt-count = 0, increment-rtt-factor = 1
GSLB-ServerIronADX(config-gslb-rtt-sim-test)# rtt-val 30
SIMULATOR: Enhanced RTT smoothing is ON
RTT sample value 30 is acceptable
RTT state before application of enhanced RTT smoothing mechanism:
------------------------------------------------------------------
RTT val = 27, RTT decimal val = 0.100
ignore-larger-rtt-count = 1
ignore-smaller-rtt-count = 0, increment-rtt-factor = 1
Applied enhanced RTT smoothing algorithm for new RTT sample 30
RTT state after application of enhanced RTT smoothing mechanism:
----------------------------------------------------------------
RTT value after smoothing = 27, RTT decimal val = 0.390
ignore-larger-rtt-count = 0
ignore-smaller-rtt-count = 0, increment-rtt-factor = 1
GSLB-ServerIronADX(config-gslb-rtt-sim-test)# rtt-val 30
SIMULATOR: Enhanced RTT smoothing is ON
RTT sample value 30 is acceptable
RTT state before application of enhanced RTT smoothing mechanism:
------------------------------------------------------------------
RTT val = 27, RTT decimal val = 0.390
ignore-larger-rtt-count = 0
ignore-smaller-rtt-count = 0, increment-rtt-factor = 1
Applied enhanced RTT smoothing algorithm for new RTT sample 30
RTT state after application of enhanced RTT smoothing mechanism:
----------------------------------------------------------------
RTT value after smoothing = 27, RTT decimal val = 0.651
ignore-larger-rtt-count = 0
ignore-smaller-rtt-count = 0, increment-rtt-factor = 1
GSLB-ServerIronADX(config-gslb-rtt-sim-test)# rtt-val 30
SIMULATOR: Enhanced RTT smoothing is ON
RTT sample value 30 is acceptable
RTT state before application of enhanced RTT smoothing mechanism:
------------------------------------------------------------------
RTT val = 27, RTT decimal val = 0.651
ignore-larger-rtt-count = 0
ignore-smaller-rtt-count = 0, increment-rtt-factor = 1
Applied enhanced RTT smoothing algorithm for new RTT sample 30
RTT state after application of enhanced RTT smoothing mechanism:
----------------------------------------------------------------
RTT value after smoothing = 27, RTT decimal val = 0.885
ignore-larger-rtt-count = 0
ignore-smaller-rtt-count = 0, increment-rtt-factor = 1
GSLB-ServerIronADX(config-gslb-rtt-sim-test)# rtt-val 30
SIMULATOR: Enhanced RTT smoothing is ON
RTT sample value 30 is acceptable
RTT state before application of enhanced RTT smoothing mechanism:
------------------------------------------------------------------
RTT val = 27, RTT decimal val = 0.885
ignore-larger-rtt-count = 0
ignore-smaller-rtt-count = 0, increment-rtt-factor = 1
Applied enhanced RTT smoothing algorithm for new RTT sample 30
RTT state after application of enhanced RTT smoothing mechanism:
----------------------------------------------------------------
RTT value after smoothing = 28, RTT decimal val = 0.96
ignore-larger-rtt-count = 0
ignore-smaller-rtt-count = 0, increment-rtt-factor = 1