Brocade Communications Systems ServerIron ADX 12.4.00 - Manual (Page 78)

66 ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
Site persistence in GSLB using stickiness
1
Enabling sticky GSLB
Enabling sticky GSLB is the minimum required configuration.
On the GSLB controller, to enable Sticky GSLB globally for all the domains, enter commands such
as the following:
SLB-Ctrl-ServerIronADX(config)#gslb policy

SLB-Ctrl-ServerIronADX(config-gslb-policy)#sticky
On the GSLB controller, to enable Sticky GSLB for a specific host, enter commands such as the
following:
SLB-Ctrl-ServerIronADX(config)#gslb-host-policy test

SLB-Ctrl-ServerIronADX(config-gslb-host-policy-test)#sticky

SLB-Ctrl-ServerIronADX(config)#gslb dns zone gslb.com

SLB-Ctrl-ServerIronADX(config-gslb-dns-gslb.com)#host-info www gslb-policy test
This example defines a host policy, then applies that policy to the specific host www. The sticky is
one function within the host policy.