Rockwell Automation 2364,2364E NRU Diode Bridge Assembly Replacement (180 - 350A DC) - Manual (Page 4)

4 NRU™ Diode Bridge Assembly Replacement (180 - 350A DC)
Publication 2364E-5.10 - April 1998
3. Disconnect the wire between suppressor diode D11 at the center
top of the left heatsink.
4. Disconnect the wire between suppressor capacitor C11 at the cen-
ter top of the right heatsink.
5. Disconnect the DC output power wires from the heatsink busbars
located near the bottom of the right heatsink. Refer to arrows in
Figure 3.
Figure 3
Location of DC Power Connections
6. Disconnect the DC output-low power wires from the heatsink
busbars located near the bottom of the right heatsink. Refer to
arrows in Figure 4.
Figure 4
Location of Output-Low Power Wire Connections