Rockwell Automation 2711E-ND1 PanelBuilder 1400E Reference Manual - Manual (Page 138)

133 Scrolling Lists
Publication 2711E-820 – January 1998
The following table displays the addresses for each of the additional
buttons:
Additional Buttons Command BLK
Transfer Address Indicator State
BLK Transfer
Address PLC Address
AUTO MODE BI52/1 (Value = 1) N30:3/1 (Value = 1)
MANUAL MODE BI52/1 (Value = 0) N30:3/1 (Value = 0)
TOGGLE
COMMAND BI52/3 N30:3/3
BI52/1 N30:3/1
SET COMMAND BI52/0 N30:3/0
BI52/1 N30:3/1
MANUAL ON BI52/4 N30:3/4
BI52/1 N30:3/1
MANUAL OFF BI52/5 N30:3/5
BI52/1 N30:3/1
NUMERIC KEYPAD
ENTER KEY FOR
STYLE NUMBER BI52/6 N30:3/6
CHANGE STYLE
NO. CONTROL
ADDR BI53/0 — 3/15 N30:4
The following table displays the addresses for the Object List PLC
files:
Object List PLC Files PLC File Addresses PLC File Data Presets
ASSEMBLY STATION N31:1 through N31:57 1 through 57
LUXURY OPTION N32:1 through N32:57 1 through 57
STATION STATUS N33:1 through N33:57 1
OPTION COMMAND N34:1 through N34:57 1
OPTION STYLE NO. N35:1 through N35:57 100
When you have assigned all the addresses for the Object List PLC
files, you are ready to begin programming the PLC.
Step 3: Program the PLC
To program the PLC, follow the ladder diagrams shown in the
following pages.