Rockwell Automation 2711-NB3 Real-Time Clock Module for PanelView Terminals - Manual (Page 3)

Publication 2711-IN038D-MU-P - September 2003
Installation Instructions
Real-Time Clock Module for PanelView
Terminals
(Catalog No. 2711-NB3)
The Real-Time Clock (RTC) Module contains a small lithium battery which has a life
expectancy of 7 years. The clock module must be replaced when the lithium
battery wears down.
Replacing the Real-Time Clock
The instructions that follow describe how to replace the Real-Time Clock (RTC)
Module in PanelView 550 (Series E and F), PanelView 600, PanelView 900,
PanelView 1000 and PanelView 1400. This does not apply to PanelView 550,
PanelView 600 touch screen terminals, PanelView 600 (Series C or later), PanelView
1000 Color (Series D or later) and PanelView 1000 Grayscale (Series B or later).
ATTENTION
Replacing the RTC Module will cause the currently loaded
application to become unusable. Before replacing the RTC
Module, backup the application. Be prepared to reload the
application after the RTC Module is replaced.
ATTENTION
The clock module contains lithium. Do not dispose the battery in
a fire or incinerator or the clock module may explode. Follow
disposal regulations in your area for lithium battery disposal.
IMPORTANT
If you have a PanelView 550 Series D or earlier terminal, you must
use the Catalog No. 2711-NB2 RTC module instructions.