Related publications, Install your flexarmor i/o module – Rockwell Automation 1798-IB8 FlexArmor 24V dc Sinking Input Modules User Manual
Page 3
FlexArmor 24V dc Sinking Input Modules 3
Publication 1798-IN001A-EN-P - January 2001
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as the following Allen-Bradley
publications:
•
Industrial Automation Wiring and Grounding Guidelines For
Noise Immunity, publication 1770-4.1
•
Automation Systems Catalog, publication B113
Related Publications
For software configuration information, refer to the 1798-ADN User
Manual, publication 1798-UM001A-US-P and the 1798-APB User
Manual, publication 1798-UM002A-EN-P.
Install Your FlexArmor I/O Module
To install the module:
•
Install the modules into the Baseplate
•
Connect the cordsets
•
Communicate with the module
These steps are explained in more detail in the following
procedures.
For instructions on how to mount the FlexArmor Baseplate,
refer to publication no. 1798-IN003A-EN-P.