Rockwell Automation 2711-NM11, -NM12, -NM13, -NM14, -NM15 PCMCIA Memory Cards - Manual (Page 4)

2 256K, 1M, 2M, 4M and 10M PCMCIA Memory Cards
40061-185-01(E)
Installing the Memory Card
To install the memory card in the PanelView terminal:
1. Locate the card slot on the back of the PanelView terminal. The location of
the card slot depends upon the terminal type.
2. PanelView terminals use both vertical and horizontal card slots.
•
For vertical card slots, position the card so that the key slot is facing the right
side of the terminal.
•
For horizontal card slots, the key slot should be on top, left side.
3. Insert the card into the card slot and push until the card is firmly seated.
!
ATTENTION: Do not force the card into slot. Forcing the card into
the slot may damage the connector pins.
PanelView 550
PanelView 1400e
PCMCIA Card Slot
Key Slot Connector Sockets
Vertical Card Slot Horizontal Card Slot
Connector Sockets
Key Slot