Rockwell Automation 6189V-2PCI15R PCI Expansion Slot Kit - Manual (Page 8)

8 PCI Expansion Slot Kit for VersaView 6181P (1500P) Integrated Display Computer
Publication 6181P-IN003C-EN-P - June 2007
b. Connect PCI cards to the riser board.
c. Fasten the slot cover bracket to the chassis using four M3x6 panhead
screws.
10. If you are installing the expansion kit on a series A computer, you may
discard the replacement air duct and proceed to step 11.
If you are installing the expansion kit on a series B or later computer, you
must replace the air duct that provides cooling air to the processor.
a. Remove the existing air duct from the back cover of the chassis by
removing the three screws.
b. Attach the replacement air duct to the back cover of the chassis using the
same three screws.
c. Set the opening of the duct to its full-open position, if possible.
PCI Riser Board