Rockwell Automation 2364F Power Supply Filter PCB - Manual

Publication 2364F-5.22 March 1999
Replacement Kit Instructions
RGU™ Power Supply Filter Board
Replacement
Contents This document shows how to remove and replace a power supply filter
board in a Regenerative DC Bus Supply Unit (RGU).
What This Kit Contains Using the table below, verify that you have received the appropriate items in
your kit:
Other Items Needed Before you begin, be sure you also have the following:
•
Tools you will need for:
– Measuring voltages
– Removing, loosening, and tightening screws (including terminal
screws)
•
Documentation:
– Your drive system schematics
– Publication 2364F-5.01, Regenerative DC Bus Supply Unit (RGU)–
User Manual
For this part: You should receive this quantity:
power supply filter board 1