Rockwell Automation 2711P-RBxxx Display Module Bezel Replacement Installation Instructions - Manual (Page 5)

Display Module Bezel Replacement 5
Publication 2711P-IN018C-MU-P - March 2007
4. Disconnect the touch screen connector.
5. Remove the screws from the back of the display module.
The number of screws varies for each terminal type.
6. Remove the sealing gasket.
7. Lift the back of the display module away from the bezel.
Work on a clean, flat, stable surface to protect the display from debris,
scratches, and damage.
Display Module Bezel
Sealing
Gasket
Display Module Bezel