Rockwell Automation 2364F RGU Main Control Board Replacement - Manual

Publication 2364F-5.12 March 1999
Replacement Kit Instructions
RGU™ Main Control Board Replacement
Firmware Version 3.01
Contents This document shows how to remove and replace the main control board in
a Regenerative DC Bus Supply Unit (RGU).
What This Kit Contains Using the table below, verify that you have received the appropriate items in
your kit:
Other Items Needed Before you begin, be sure you also have the following:
•
Tools you will need for:
– Measuring voltages
– Removing, loosening, and tightening screws (including terminal
screws)
– Torquing screws (4 to 14 lb-in / 0.5 to 1.5 N-m)
•
Documentation:
– Your drive system schematics
– Publication 2364F-5.01, Regenerative DC Bus Supply Unit (RGU)–
User Manual
For this part: You should receive this quantity:
main control board 1
ESD wrist strap 1