Rockwell Automation 2100-ENET E3 Plus EtherNet/IP Adapter - Manual

Installation Instructions
E3 Plus EtherNet/IP Adapter
Catalog Number 2100-ENET
Introduction
The E3 Plus EtherNet/IP adapter is a linking device that lets users connect an E3 or E3 Plus
Solid State Overload or an 825-P Motor Protection System directly to an EtherNet/IP network.
This document explains the basic steps needed to configure the E3 Plus EtherNet/IP adapter.
Topic Page
Introduction 1
Important User Information 2
Adapter Components 3
Status Indicators 4
Set the IP Network Address 4
Install EDS File 7
Logix Controller I/O Messaging 9
Additional Resources 12