Rockwell Automation 2706 Dataliner 10 Message Display - Manual (Page 9)

Dataliner DL10 Message Display 9
EMI Power-Line Filters (EU Installations Only)
DL10 displays intended for use in the European Union require a power-line filter.
One line filter is required for each installed display. Two filter models are available.
These filters are functionally identical, they differ only in termination style.
Schaffner Part No. Termination Style
FN 660-3/06 Fast-On (Spade) connectors
FN 660-3/07 Wire leads
Line filters are available from an authorized Schaffner distributor.
(FN 660-3/06)
27mm
(1.06 in.)
12 mm
(0.47 in.)
30mm
(1.18 in.)
85 mm
(3.35 in.)
65 mm
(2.56 in.)
5.3 mm
(0.21 in.)
54 mm
(2.13 in.)
(FN 660-3/07)
75 mm
(2.95 in.)
Part Number
Part Number
When properly installed, power-line filters prevent interference currents in the
power lines. Interference currents can affect other devices on the same power
line and other nearby equipment. Connect the Dataliner message display to the
power-line filter as shown on the following page.