Rockwell Automation 6181P-xxxx Integrated Display Computers, Series A to D - Manual (Page 53)

53 Publication 6181P-UM001G-EN-P - July 2008 53
Chapter
6
Maintenance
Chapter Objectives This chapter provides information on how to:
•
clean the display.
•
replace the battery.
•
dispose of the backlight assembly.
•
ship or transport the computer.
Clean the Display
Follow these steps to clean the display.
1. Disconnect power from the computer at the power source.
2. Using a clean sponge or a soft cloth, clean the display with a
mild soap or detergent.
3. Dry the display with a chamois or moist cellulose sponge to
avoid water spots.
ATTENTION
Use of abrasive cleansers or solvents may damage the display
window. Do not scrub or use brushes.
ATTENTION
If the computer has a touchscreen, be aware that it is possible
for screen objects to activate during equipment wash-downs if
the computer is turned on.