Rockwell Automation 6189V-4GDDR2 CompactFlash Cards for 6181X Hazardous Location Computers - Manual (Page 2)

Allen-Bradley, Rockwell Software and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Publication 6189V-IN003A-EN-P - September 2010
Copyright © 2010 Rockwell Automation, Inc. All rights reserved. Printed in China..
Load a CF Card in the
External CF Card Slot Follow these steps to load a CF card in
the external CF card slot.
1. Loosen the screw that secures
the CF card slot cover (1).
2. Open the CF card slot cover (2).
If necessary, remove existing
card by pushing button on hinge
side.
3. Insert the CF card into the slot
until it is firmly seated (3).
4. Close the CF card slot cover, then tighten its screw (1).
Load a CF Card in the
Internal CF Card Slot Follow these steps to load a CF card
in the internal CF card slot.
1. Disconnect power from the
computer.
2. Loosen the screw that secures
the CF card slot cover (1),
then the screw that secures the
CF card slot lever (2).
3. Extend the CF card slot
lever (3), then pull out the CF card tray (4).
4. Remove the CF card lock screw (5).
If necessary, remove existing CF card by sliding it out of the slot.
5. Insert the CF card into the slot until it is firmly seated (6).
6. Secure the CF card with the CF card lock screw, then reinsert the CF card
tray into the computer.
7. Tighten the CF card slot cover and lever screws.
6181X-12TPXPDC
Display Computer
IMPORTANT Reinstalling the CF card lock screw is required to meet hazardous
locations, mechanical shock, and vibration requirements.
6181X-12TPXPDC
Display Computer