Rockwell Automation 2364 AC Line and Control Power Fuse Replacement - Manual (Page 4)

NRU and RGU are trademarks of Rockwell International or its subsidiaries.
Lexan is a trademark of General Electric Corp.
Glastic is a trademark of Glastic Corp.
Publication 2364-5.11 - April 1998
Supersedes Publication 2364-5.11 - September 1997
P/N 185116
 1998 Rockwell International. All Rights Reserved. Printed in USA
Installing a Control Power Fuse Use this procedure to install the fuse:
1. Verify that the fuse is of the correct size and type:
2. Use the fuse-puller to press the fuse into place.
Note: Rejection type fuses can only be installed one way.
3. Replace any Lexan guards that you removed.
4. Dispose of the removed part according to your company’s procedures
and local ordinances.
Bulletin 2364 Current Code Control Power Fuse
A 2A, KLDR
B 2A, KLDR
C 3A, KLDR
D 4A, KLDR
E 5A, KLDR
F 12A, KLDR
G 12A, KLDR
J 3.5A, KLDR
K 5A, KLDR
L 6.25A, KLDR
M 12A, KLDR
N 15A, KLDR (F7)
10A, KLDR (F5)