Rockwell Automation 2705-ND1 Keypad Development Software User Manual
Page 27
Chapter 5
Setup Functions
5–4
Entering the Time
The time is displayed and entered in 24 hour format (hh:mm:ss). To enter a
new time, select Time and press [Enter] or press [T].
When you select Time, the field to the right opens allowing you to enter a
new time. The cursor is positioned at the beginning of the field.
Valid entries for the time field are
hh
Enter an hour value from 0–24
mm
Enter a minute value from 0–59
ss
Enter a second value from 0–59
Enter a new time and press [Enter]. The highlight then moves to Date.
If you enter an invalid time, the following message displays:
Use any of the keys below while entering data in the Time or Date field.
Data Entry Keys
Function
[0
] – [
9
]
Enters digit into date or time field.
[
→
] [
←
]
Moves cursor to right or left.
[Enter] or [
↵
]
Accepts entry and moves to next menu option.
[BackSpace]
Deletes character to left of cursor.
[Del]
Deletes character at cursor.
[Ins]
Toggles editing between insert and overstrike mode.
[Esc]
Aborts data entry window or field without saving changes.
[F3]
Cancels any changes and resets field or window to previous state.
[F5]
Clears data field.
[F6]
Clears to end of data field.
[F7]
Moves cursor to beginning of field.
[F8]
Moves cursor to end of field.