Rockwell Automation 9306 DriveExplorer PC Software System Requirements - Manual

Installation Instructions
DriveExplorer PC Software System
Requirements / Installation Instructions
System Requirements Windows
®
2000 (Service Pack 4 or later) or Windows XP (Service Pack 3 or later)
PC with 486 66MHz processor or better with at least 16 MB of RAM and 6 MB of
hard disk space, VGA monitor, CD-ROM drive (for installation only), mouse or
other pointing device, keyboard, serial communications or Ethernet connection.
Windows Vista Business or Basic versions
PC with 800MHz 32-bit (x86) or 64-bit (x64) processor or better with at least 512
MB of RAM and 20 GB hard drive, SVGA graphics with 800x600 resolution or
higher, CD-ROM drive (for installation only), mouse or other pointing device,
keyboard, serial communications or Ethernet connection.
Internet Explorer version 6.0 (included on CD) or later must be installed on your
PC.
Installation Instructions Note: It is strongly recommended that you quit all Windows programs before
running this Setup program.
1. Insert the DriveExplorer installation CD into the PC's CD-ROM drive. The
installation application should open automatically. If the installation
application does not open automatically, run Setup.exe at the root of the
installation CD. The DriveExplorer Setup screen appears: