Rockwell Automation 6189V-CFSSD16GB Memory Module (DRAM) for 6181X Industrial Computers - Manual

Installation Instructions
Memory Module (DRAM) for 6181X Industrial Computers
Catalog Number 6189X-4GDDR2
About the Memory Module This document provides information on how to add memory in the industrial
computers for hazardous locations. Use only catalog number 6189X-4GDDR2.
Other memory modules are not acceptable. Catalog number 6189X-4GDDR2
consists of two 2 GB memory modules
Required Tools These tools are required for component replacement:
• #2 Phillips screwdriver
• Scissors (for DIMM replacement only)
• Antistatic wrist strap (recommended)
Rear Cover
Follow these steps to remove the rear cover.
1. Disconnect power from the computer.
2. Loosen the three screws that secure the rear cover.
3. Open the cover and detach it from the chassis (1).
Follow these steps to reinstall the rear cover.
1. Fasten the rear cover to the chassis (2).
2. Tighten the three screws to secure the rear cover .
IMPORTANT When installing hardware or performing maintenance procedures
requiring access to internal components, we recommend that you first
back up all computer data to avoid loss.
To avoid voiding your product warranty, use only Rockwell Automation
Allen-Bradley approved replacement parts and accessories. You can view
a current list of accessories at the Rockwell Automation website
http://www.ab.com/industrialcomputers.com .
ATTENTION: Be sure to read and understand the entire installation or
removal procedure first, before you begin configuring the computer
hardware.
Review the specifications of a new component before installing it to make
sure it is compatible with the computer. Record the model and serial number,
and any other pertinent information of new components, for future reference.
ESD can damage the computer and components. Make sure you work in a
static-safe environment and wear a grounding strap whenever handling
circuit boards, power supplies, memory modules, or other internal
components.
SHOCK HAZARD: The computers contain line voltages. Disconnect all
power to the computer before you install or remove system components.
Failure to do so could result in severe electrical shock or damage to the
computer.
6181X-12TPXPDC Display Computer