Rockwell Automation 2364,2364F,2364P RGU Control Power Filter Replacement - Manual (Page 4)

Publication 2364F-5.19 - November 1998
Supersedes Publication 2364F-5.19 - March 1998
P/N 185682
 1998 Rockwell International. All Rights Reserved. Printed in USA
Installing the Control Power
Filter 1. Place the new control power filter on the three mounting screws and
secure the screws.
2. Connect the three control power leads appropriately to CH1, C1, and
R1.
Concluding Steps After installing the control power filter, check for any scrap material or tools
in the RGU, and secure the bay door. Send the filter to Rockwell
Automation for repair, or dispose of old power filter according to your
company’s procedures and your local ordinances.
Fuses
PT1
EA 10 C ontrol Pow er Filter
C H 1
R 1 C 1 C H 2