Rockwell Automation 2090-SCVPx Fiber Optic Cable Installation Quick Reference - Manual (Page 8)

8 Fiber Optic Cable Installation
Publication 2090-QR001D-EN-P – April 2005
• Protect cables from excessive or frequent bending. Cables do not
have a flex rating. Routing on a cabinet door should be used as a last
resort.
Figure 6 Routing Technique for Cabinet Door
• Use proper cable pulling techniques when routing cables. See
the section entitled Use Proper Pulling Techniques for Fiber Optic
Cable
earlier in this manual.
• Attach cables with plastic clamps having large surface areas.
Avoid pinching or squeezing cable. Cable clamps should be installed
manually with gentle pressure.
Figure 7 Proper Use of Plastic Clamps